10: S81-F6002-1; Description; Technical Features; Configuration - Honeywell H-S81-HS Operation Manual

I/O modules
2.4.10 S81-F6002-1

Configuration

By using the ProS81 configuration program, the following parameters can be set for each virtual
channel:
Parameter
Type
Mode
Alarm delay
Type of indication
Enable/Disable status export to Hosts
Enable/Disable commands from Hosts
on the channel
NOTE: Logic function virtual inputs are set in output zones, whereas logic function virtual
outputs are set in zone sensors.

Logic Functions

The following time diagrams describe in detail the operation of the various logic functions of the
module.
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015

Description

Logic module able to control 100 S-R flip flops, 100 toggles, and 100 timers.
Timers can be configured for two operating modes (Mode-A and Mode-B).

Technical Features

• Redundancy:
• Maximum number of S-R flip flops:
• Maximum number of logic Toggles:
• Maximum number of Timers:
• Timer range:
• Supply voltage:
• Quiescent current:
• Operating temperature:
• Storage temperature:
• Maximum humidity:
• Hot swap capability:
Status Indications
The front panel includes four LEDs with the following functions:
LED
F1 (Green LED)
F2 (Green LED)
F3 (Green LED)
Disabled (Yellow LED)
Type
Sensors
Sensors
Sensors
Sensors
Sensors/Actuators
Sensors/Actuators
Parts of the H-S81-HS System
Yes
100
100
100
0-255 seconds
22-29VDC
9mA
-5 - 50 °C
-30 - 80 °C
95% (RH) non-condensing
yes
Indication
Steady on if a logic function input variable is active
Steady on if a logic function output variable is active
Flashing during Timer count.
Steady on if an input or output variable is disabled
Mode
Flip Flop / Toggle / Timer
A / B (Only for Timer types)
0-255 seconds (Only for Flip Flop and Timer types)
Fire, Supervisory, Gas, Trouble, Hidden, Buzzer Only
No, TCP1, TCP2, RS232
No, TCP1, TCP2, RS232
71