Download  Print this page

Operations At Access Level 1 - Honeywell H-S81-HS Operation Manual

Industrial fire panel
Hide thumbs

Advertisement

Operating Instructions
• Level 3: accessible to the MAINTENANCE PERSON
• Level 4: for the MANUFACTURER only
Level 1 does not require any password and is accessed by pressing F1; Level 2 or 3 require the rel-
evant passwords. Control panels are supplied with the following default passwords that can be
changed in the operator cycle:
The following table shows the required access levels for carrying out the main functions of the fire
alarm section.

7.4 Operations at Access Level 1

After the initialization cycle, when the system is in standby mode, the display shows the status of
the control panel, as show in the following picture.
7.4.1 Local Buzzer Silencing
Press the button Local Buzzer Silencing. The last line of the display will show a confirmation mes-
sage for two seconds.
132
Access level
Area 1 Level 2 (safety)
Area 1 Level 3 (safety)
OPERATOR ACTIVITIES
Local Buzzer Silencing
Ongoing timer override
Alarm, trouble and fault viewing
Sounder silencing
Alarm/trouble reset
Sounder activation (evacuation)
Access to View menu
Access to Enable/Disable menu
Access to Management menu
Access to Configuration menu
Figure 7.3 Standby Mode
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Operations at Access Level 1
Prefix
Password
1
51729
1
61841
Level 1
Level 2
Level 3

Advertisement

Table of Contents
loading

  Also See for Honeywell H-S81-HS