Honeywell H-S81-HS Operation Manual page 91

Termination modules
Assembly
Install the weighing module to the floor with the relevant base by using the four fixing holes on the
lower section of the support. Before tightening the fixing nuts, make sure that cylinder base plate is
perfectly level. Do not install the module outdoor.
Programming the Weighing Module Address
In order to program the address of weighing modules follow the procedure below:
1. Enter the module diagnosis cycle.
2. Select the Program Device Address menu.
3. Set the desired address using the
4. Press Enter.
NOTE:
assigned must be connected to the bus.
Weighing Module Reset
In order to reset the weighing modules, follow the procedure below:
1. Enter the module diagnosis cycle.
2. Select the Devices menu.
3. Go to the weighing module to be reset using the arrows.
4. Press Enter.
2.5 Termination modules
I/O modules may be terminated by using termination modules or by directly using a multi-conduc-
tor cable, depending on the bus type in use.
Module PN Description
S81-F3002-1 Module with 8 x 22VDC monitored inputs
S81-F3002-2 Module with 8 x 22VDC monitored inputs
S81-F3002-3 Module with 8 x 12VDC monitored inputs
S81-F4001-1 Module with 1 x 4-20mA analog input
S81-F4001-2 Module with 1 x 4-20mA analog input
S81-F4002-1 Module with 2 x 4-20mA analog inputs
S81-F4002-2 Module with 2 x 4-20mA analog inputs
S81-F4003-1 Module with 8 x 4-20mA analog inputs
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
During this stage, only the weighing module to which address has to be
Technical Features
• Support Material:
• Supply voltage:
• Typical absorption:
• Protection class:
• Operating temperature:
• Measuring range:
• Maximum load:
• Compatible control modules:
• RS485 bus maximum length: 1000 meters
↑ ↓
and keys.
Termination with
Flat Cable
S81-T8001-1
Not available
S81-T8001-1
S81-T8003-1
Not available
S81-T8003-1
Not available
S81-T8003-1
Parts of the H-S81-HS System
Steel
22-28VDC
36mA typical
IP 30
-5 - 50°C
0 - 3000 hg
300 Kg
S81-F7008-1
Termination with
Cable
S81-CCT1
S81-CCT1R
S81-CCT1
S81-CCT2
S81-CCT2R
S81-CCT7
S81-CCT7R
S81-CCT3
91