Communication Protocol For Supervisory Systems - Honeywell H-S81-HS Operation Manual

General Description
Error Messages of the Communication Network:
The following error messages concerning communication networks can be shown on control panel
displays:
Message Type
ID xxx Communication failure 100
ID xxx Communication failure 101
ID xxx Communication failure 5
ID xxx Remote rule nnn undefined

1.7 Communication Protocol for Supervisory Systems

H-S81-HS systems can be connected to IRIDE supervisory system via LAN network or point-to-
point serial connection. A maximum of 2 supervisors per control panel can be configured on the
LAN network, and one on Host serial port. In both cases, a dedicated protocol is used. The connec-
tion between control panels and supervisors can be made of copper, optical fiber or copper/fiber
(mixed), for meeting different needs. For using IRIDE supervisory program, please refer to the spe-
cific manual ST-021-IT.
24
Control Panel
Master
Master
Slave
Master
Figure 1.9 Control Panel Remote Monitoring
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Communication Protocol for Supervisory Systems
Error Type
The master cannot communicate with the slave
Remote rule referred to the control panel
The slave cannot communicate with the master
Undefined remote rule