Wiring A Sounder Base; Wiring And Programming Aspiration Detectors - Honeywell Notifier AFP-100 Wiring Manual

Intelligent Detectors, Intelligent Detector Bases, and Wireless Gateway

10.5 Wiring a Sounder Base

Figure 10.5 shows typical wiring of the B200S and B200S-LF Sounder Bases.
Figure 10.6 shows typical wiring of the B200SR and B200SR-LF Sounder Base.

10.6 Wiring and Programming Aspiration Detectors

The FSA-5000 Intelligent FAAST XS, FSA-8000 Intelligent FAAST XM, FSA-20000 Intelligent FAAST XT, and FSA-20000P Intel-
ligent FAAST XT PRO aspiration smoke detectors may be used to provide early warning fire protection using aspiration sensing tech-
nology. These detectors are listed with UL for use with the NFS-320, NFS-320SYS, NFS2-640, and NFS2-3030.
52
To next device
on SLC
SLC
Figure 10.5 Wiring of the B200S/B200S-LF Sounder Base
To next device
on SLC
SLC
Figure 10.6 Wiring of the B200SR/B200SR Sounder Base
NOTE: The base wiring is identical for -IV variant. For more detailed wiring on sounder bases, refer to the
device's installation instructions.
Note: The "grid" pattern on the
B200S/B200S-LF has been
removed for illustration
purposes only.
Optional Remote
LED Annunciator
RA100Z/400Z
UL-Listed 24V
Power Supply
with System
Note: The "grid" pattern on the
B200SR/B200SR-LF has been
removed for illustration
purposes only.
Optional Sounder
Interconnect
UL-Listed 24V
Power Supply
with System
Notifier SLC Wiring Manual — P/N 51253:U5 12/20/2017
Wiring a Sounder Base