2: Zone Status; 5: Event History; 6: Alarm History - Honeywell H-S81-HS Operation Manual

Operating Instructions
7.17.2 Zone Status
To view zone status. The list of alarm, tamper and trouble zones can be shown, with the relevant
details. In this page, the overview modes are the same of area 1, with the additional feature that
zone statuses are displayed under normal conditions. If there is at least one included zone, the
Included Zones message is displayed. Otherwise, the Excluded Zones message is shown.
7.17.3 Control Panel Tamper Status
To view the control panel tamper status. It can be Normal, Active or Disabled. If it is disabled, the
remaining time before automatic enabling is shown. In this page, control panel tamper reset is pos-
sible.
7.17.4 Disabling
To view the list of disabled zones and devices. Disabling overview is the same of that of area 1.
7.17.5 Event History
To view the history of the last 250 events.
7.17.6 Alarm History
To view the history of the last 100 alarms. History overview is the same of that of area 1.
7.18 Operations at Access Level 3
By entering level 3 password, preceded by the prefix 2, the main menu shown below is accessed.
The Exclusion/Inclusion and View options are the same as those of level 2.
154
Figure 7.36 Main Menu at Access Level 3
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Operations at Access Level 3