Show Access-Group; Snmp Commands; Table 4-37 Snmp Commands - SMC Networks 8748L2 Management Manual

show access-group

This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
IP access-list jerry
Console#

SNMP Commands

Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
Command
show snmp
snmp-server
community
snmp-server contact Sets the system contact string
snmp-server location Sets the system location string
snmp-server host
snmp-server enable
traps

Table 4-37 SNMP Commands

Function
Displays the status of SNMP
communications
Sets up the community access string to
permit access to SNMP commands
Specifies the recipient of an SNMP
notification operation
Enables the device to send SNMP traps
(i.e., SNMP notifications)
SNMP C
OMMANDS
Mode Page
NE, 4-124
PE
GC 4-125
GC 4-126
GC 4-126
GC 4-127
GC 4-129
4-123