C
L
OMMAND
INE
Example
Console#show access-group
Interface ethernet 1/2
IP standard access-list david
MAC access-list jerry
Console#
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
SNMP Version 3 also provides security features that cover message
integrity, authentication, and encryption; as well as controlling user access
to specific areas of the MIB tree. To use SNMPv3, first set an SNMP
engine ID (or accept the default), specify read and write access views for
the MIB tree, configure SNMP user groups with the required security
model (i.e., SNMP v1, v2c or v3) and security level (i.e., authentication and
privacy), and then assign SNMP users to these groups, along with their
specific authentication and privacy passwords.
Command
snmp-server
show snmp
snmp-server
community
snmp-server
contact
snmp-server
location
snmp-server host
4-150
I
NTERFACE
Table 4-39 SNMP Commands
Function
Enables the SNMP agent
Displays the status of SNMP
communications
Sets up the community access string to
permit access to SNMP commands
Sets the system contact string
Sets the system location string
Specifies the recipient of an SNMP
notification operation
Mode
Page
GC
4-151
NE, PE
4-152
GC
4-153
GC
4-153
GC
4-154
GC
4-155