Spectracom VelaSync 1232 User Manual page 97

3. The
4. The
CHAPTER 2 • VelaSync User's Manual Rev. 3
NTP Access Restrictions
To ADD or EDIT an access restriction, click the PLUS icon or the Change
button, respectively, and proceed to Step 4. below.
To DELETE an access restriction, click the corresponding Delete button,
and confirm by clicking OK.
NTP Access Restrictions
Fill in the fields:
Restriction Type—Choose either Allow or Deny.
If you select "Deny", the configured portion of the network will not
have NTP access to VelaSync, but the rest of the network will have
access to VelaSync. If you select "allow", the configured portion of
the network will have NTP access to VelaSync, but the rest of the
network will not have access to VelaSync. By default, VelaSync
allows all IPv4 and IPv6 connections.
IP Version—Choose IPv4 or IPv6
IP Address—Enter the appropriate hostname.
Subnet Mask—Enter the appropriate IP mask.
Status window will display:
window will display:
2.10 Configuring NTP
85