Spectracom VelaSync 1232 User Manual page 156

3.3 Managing References
1. Navigate to
will be displayed.
2. In the
GNSS 0.
3. In the
4. Configure the menu options as required:
Enable A-GPS Client
This feature will schedule assistance data to be collected and updated every hour. On
startup, if data is present, it will be sent to the receiver.
Apply A-GPS Data
If this option is selected, VelaSync will
data to the receiver once you click Submit.
Time and position are user-configurable via the next two menu options; VelaSync col-
lects A-GPS satellite data from an external source automatically.
144
INTERFACES: REFERENCES > GNSS
GNSS Reference panel on the right, click the GEAR button next to
GNSS 0 window, locate the
Note: The options displayed on your screen depend on your sys-
tem configuration.
Reference. The GNSS screen
A-GPS panel at the bottom.
immediately apply the time, position and satellite
CHAPTER 3 • VelaSync User's Manual Rev. 3