Spectracom VelaSync 1232 User Manual page 231

Command
ip4set
ip6add
ip6del
ip6get
iptables
licenses
list
loadconf
localget
locallist
localset
model
net
netnum
net4
net6
options
oscget
portget
portset
portstate
ppsctrl
priorset
radius setretry
radius getretry
VelaSync User's Manual
Used to set IPv4 Ethernet port settings information (IP address net mask
and gateway)
Used to add IPv6 Ethernet port settings information (IP address net mask
and gateway)
Used to delete IPv6 IP address
Used to obtain the IPv6 IP address
See for more information.
Displays configured licenses installed (if any)
Outputs a list of commands
Restore a saved configuration and reboot
Used to obtain the configured local clock
Used to display local clocks
Used to configure local clocks
Displays the Serial Number of the unit
Displays network status
Displays the number of general-purpose network interfaces
Displays IPv4 network status
Displays IPv6 network status
Displays configured options installed (if any)
Displays the installed system oscillator
Display whether network port is enabled (for example, "portget ETH2")
Enable or disable a network port:
"portset x on" where "x" is the port number (for example, "ETH2")
"portset X off"
[NOTE: Available since Web UI Revision no. 5.1.2]
Display the current state for a network port
Enable/disable individual 1PPS output signals
Sets the priority of an entry in the reference priority table
<value> Sets how many radius login retries will be attempted
<value> Gets the number of radius login retry attempts
Description
APPENDIX
219