Spectracom VelaSync 1232 User Manual page 180

4.4 Notifications
2. In the
fications (see below), and click Submit.
The columns under each tab are:
168
For more information on this subject, see the Spectracom Technical
Email Notification Setup
Note
The Events panel, offering three tabs:
Timing: Events for Sync Status and Holdover, Frequency error, Input
references and the internal oscillator.
GPS: Events related to the GNSS receiver, including antenna cabling,
tracking less than the minimum number of satellites and GNSS
receiver faults.
Systems: Events related to the system operation, including minor
and major alarms being asserted, reboot, timing system errors and
option cards.
Events panel, choose the Timing,
Event—This is the event that will trigger the notification. The events under
each tab will vary according to context.
Mask Alarm—Check here to enable an alarm mask. Enabling an alarm mask
for a given notification will prevent that notification from generating an
alarm condition. Other notifications for that event and logging of the event
will still occur.
SNMP Trap—Check here to configure the event to trigger an SNMP Trap.
Email—Check here to configure the event to trigger an email notification.
.
GPS or System tab. Configure your Noti-
CHAPTER 4 • VelaSync User's Manual Rev. 3