Snmp V1/V2C - Spectracom VelaSync 1232 User Manual

2.9.7.1 SNMP V1/V2c
SNMP V1 is the first version of the SNMP protocol, as defined in the IETF (Internet
Engineering Task Force) RFCs (Request for Comments) number 1155 and 1157. SNMP
V2c is the revised protocol, but it also uses the V1 community based administration
model.
Creating Communities
1. Navigate to
2. In the
3. The
CHAPTER 2 • VelaSync User's Manual Rev. 3
Note: When compiling the MIB files, some SNMP Manager pro-
grams may require the MIB files to be named something other
than the current names for the files. The MIB file names may be
changed or edited as necessary to meet the requirements of the
SNMP Manager. Refer to the SNMP Manager documentation for
more information on these requirements.
Note: In addition to the Spectracom MIB files, there are also
some net-snmp MIB files provided. Net-snmp is the embedded
SNMP agent that is used in the VelaSync and it provides traps to
notify the user when it starts, restarts, or shuts down. These MIB
files may also be compiled into your SNMP manager, if they are
not already present.
Spectracom's private enterprise MIB files can be requested and obtained from
the Spectracom Customer
techsupport@spectracom.com
Note: By default,
in the sysContact field of the SNMP Status panel of the SNMP
Setup page.
MANAGEMENT > NETWORK: SNMP
SNMP V1/V2 panel click the PLUS icon in the top-right corner.
SNMP V1/V2c Settings for Access
2.9 Configuring Network Settings
Service department
.
techsupport@spectracom.com
Setup.
window will display:
via email at
is the address
61