Spectracom VelaSync 1232 User Manual page 71

Restoring the Default SNMP Configuration
To restore the VelaSync to its default SNMP configuration:
1. Navigate to the
2. In the
3. Confirm that you want to restore the default settings in the pop-up message.
Configuring the SNMP Status
The SNMP Status Settings are sysObjectID, sysContact, and sysLocation. To con-
figure SNMP Status Settings:
1. Navigate to
2. In the
CHAPTER 2 • VelaSync User's Manual Rev. 3
2. The
Actions panel
figuration button.
3. The SNMP Status
An SNMP ON/OFF switch.
An Authentication Error Trap
SysObjID— The System Object ID number. This is editable in the
SNMP Status panel (see
Contact Information—The email to contact for service. This is edit-
able in the SNMP Status panel (see
below).
Location—The system location. This is editable in the SNMP Status
panel (see "Configuring the SNMP Status"
Description—A simple product description. This is not editable in the
SNMP Status.
MANAGEMENT > NETWORK: SNMP Setup
Actions panel, click the
MANAGEMENT > NETWORK: SNMP
SNMP Status panel on the left, click the GEAR icon in the top-right corner
of the panel.
2.9 Configuring Network Settings
, which contains the
panel, which offers:
ON/OFF switch.
"Configuring the SNMP Status"
"Configuring the SNMP Status"
Restore Default SNMP Configuration
Restore Default SNMP Con-
below).
below).
screen.
button.
Setup.
59