Spectracom VelaSync 1232 User Manual page 230

APPENDIX
Command
defcert
dhcp4get
dhcp4set
dns4get
dns4set
dhcp6get
dhcp6set
doyget
doyset
gpsdop
gpsdserviceportget Displays the GPSD service port
gpsdserviceportset Sets the GPSD service port
gpsinfo
gpsloc
gpsmdl
gpssat
gw4get
gw4set
gw6get
gw6set
halt
helpcli
hostget
hostset
hotstart
ip4get
218
Used to create a new Spectracom self-signed SSL certificate for HTTPS in
case of expiration of the original certificate
Displays whether DHCP is enabled
Used to enable or disable DHCP
Displays the configured DNS servers
Used to configure the DNS servers
Displays whether DHCPv6 is enabled
Used to enable or disable DHCPv6
Used to obtain the current Day of Year
Used to set the current Day of Year
Displays GNSS receiver positional accuracy estimates
Applicable to SAASM-equipped VelaSync units only
Displays GNSS latitude, longitude and antenna height
Displays the GNSS Manufacturer and Model
Displays GNSS satellites tracked and maximum signal strength being
received
Displays configured IPv4 gateway addresses
Used to configure the IPv4 gateway addresses
Displays configured IPv6 gateway address
Used to configure the IPv6 gateway address
Used to Halt the system for shutdown
Provides list of available commands and syntax
Displays the DNS hostname
Sets the DNS hostname
Initiate a hot start operation on the SAASM GPS receiver
Displays IPv4 Ethernet port settings information (IP address net mask and
gateway)
Description
VelaSync User's Manual