Spectracom VelaSync 1232 User Manual page 217

4. Download the latest upgrade software bundle from the Spectracom website
5. Perform the actual upgrade by navigating to
6. Click
7. Verify that the update was successful: Navigate to
CHAPTER 4 • VelaSync User's Manual Rev. 3
Downloading Logs" on page 201.)
To free up disk space:
a. Delete old log files:
Logs.
b. Delete old statistics files: [~] >
c. Delete previous Upgrade files:
Update System >
and Update System
onto your PC.
Actions: Update System
viously downloaded onto your PC (updateXYZ.tar.gz).
Once you have uploaded the software bundle, the following checkbox options will
be presented:
Remove software
software bundle from the system.
Perform update: Perform the software upgrade.
Perform clean update: Factory settings will be applied during the upgrade;
any custom settings you may have applied previously will be overwritten!
This also includes the unit's static IP address (if you applied one): it will be
replaced by the default DHCP address (i.e., 0.0.0.0.) Also note that the
browser session will terminate: After reconfiguring the unit's IP address,
you will need to login to the Web UI in a new browser session.
Submit to carry out the update. A progress bar will provide real-time status
information:
and confirm the new SW version in the
Note: Should you use DHCP, a new IP address may be assigned to your
unit, and you may have to point your web browser to it.
Tools > Upgrade/Backup
Clear All Stats.
Tools > Upgrade/Backup
Delete Upgrade File(s). Note that
cannot be selected at the same time.
TOOLS
Software. Upload the upgrade software bundle pre-
bundle: Cancel the upgrade, and remove the uploaded
System Configuration
4.8 Updates and Licenses
> Disk Status > Clear All
> Actions >
Delete Upgrade File
> Upgrade/Backup >
Tools > Upgrade/Backup,
panel.
205