Configuring A Leap Second - Spectracom VelaSync 1232 User Manual

3.2 System Time
B. Sequence of seconds output when
Second"):
3.2.3.4 Configuring a Leap Second
To manually correct the System Time for a leap second:
1. Navigate to
agement screen will be displayed. In the lower left-hand corner, the
Information
unless:
2. To access the
Leap Second Information
3. The
4. In the
5. In the
occur.
6. Click Submit.
To delete
106
56, 57, 58, 0, 1, 2, 3, 4 ...
MANAGEMENT> OTHER: Time
panel will show if a leap second if pending. This panel will be empty,
a. A leap second is pending, and VelaSync has obtained this information auto-
matically from the GPS data stream.
b. A leap second had been configured previously by a user via the
Second window.
Edit Leap Second
Edit Leap Second window will display:
Leap Second Offset
Date and Time field, enter the date that the desired leap second should
a leap second correction, click the Delete button.
subtracting a second
Management. The Time Man-
information window, click the GEAR icon in the
panel.
field enter the desired GPS Offset.
CHAPTER 3 • VelaSync User's Manual Rev. 3
("negative Leap
Leap Second
Edit Leap