Vlan Support - Spectracom VelaSync 1232 User Manual

2.9.8

VLAN Support

VLAN support in VelaSync allows you to assign a VLAN ID to a specific port to facilitate
communication within your network. These VLAN interfaces have the same con-
figuration options as the standard untagged Ethernet interfaces.
To set up VLAN interface identification tags:
1. Navigate to
2. In the popup panel labeled
CHAPTER 2 • VelaSync User's Manual Rev. 3
Each row of the SNMP Traps
tionality, the User/Community name for the trap, the IP address/Hostname of
the SNMP Manager and values applicable only to SNMP v3, which include the
Engine ID, the Authorization Type, the Privilege Type.
You may define different SNMP Managers to whom SNMP traps can be sent over
the network. This allows for SNMP Managers in different geographical areas to
receive the same SNMP traps.
Note: Spectracom has been assigned the enterprise identifier
18837 by the IANA (Internet Assigned Numbers Authority). Spec-
tracom's product MIBs reside under the enterprise identifier
@18837.3.
For detailed descriptions of the objects and traps supported by the VelaSync,
please refer to the Spectracom VelaSync MIB files. See
Support MIB Files" on page 60.
MANAGEMENT
interfaces. (You can also view or delete any configured VLAN tags from this
panel).
2.9 Configuring Network Settings
panel includes the version of the SNMP func-
> Network Setup. In the
VLAN Setup, click on the plus sign to add your VLAN
"Accessing the SNMP
Actions panel, select VLAN.
67