Spectracom VelaSync 1232 User Manual page 92

2.10 Configuring NTP
3. The
4. Enter the required information into the fields:
80
To ADD a new NTP Peer, click the PLUS icon in the top right corner of the
NTP Peers panel.
To REMOVE an NTP Peer (and its associated configurations), click the X-
button next to it.
NTP Peers edit window opens:
Host: The IP address for the server to be used as host.
Min Poll Interval: Select a value from the drop down (the default is 3 (8s).
Max Poll Interval: Select a value from the drop down (the default is 3 (8s).
For both NTP Peers, and NTP Servers the Minimum and Maximum Poll rate
for NTP packets can be configured.
Enable Symmetric Key: Click the checkbox to enable/disable Symmetric
Key. See also: "Configuring NTP Symmetric Keys" on the facing
Note: Before you can edit the
Symmetric Keys
metric Keys (MD5) " on the facing
Mark as Preferred: Check this box to prefer this NTP Peer over other NTP
Peers ("NTP Peer Preference"). This will result in VelaSync synchronizing
more frequently with this Peer. For additional information on NTP Prefer-
ences, see "NTP Timing System: Reference Selection and Preference" on
page 1.
Key field, you must set up
through the Actions Panel. See
page.
CHAPTER 2 • VelaSync User's Manual Rev. 3
page.
"NTP: Sym-