Spectracom VelaSync 1232 User Manual page 56

2.9 Configuring Network Settings
The
The
services, as well as the Web UI display mode, details see:
page 48.
The
and manage VelaSync's network ports via two buttons:
44
Actions panel provides:
General Settings: Allows quick access to the primary network settings
necessary to connect VelaSync to a network. See
tings" on the facing page.
Web Interface Settings:
Web interface timeout: Determines how long a user can stay logged
on. For more information, see
Access Control : Allows the configuration of access restrictions from
assigned networks/nodes.
Login Banner: Allows the administrator to configure a custom banner mes-
sage to be displayed on the VelaSync Web UI login page and the CLI (Note:
There is a 2000 character size limit).
SSH: This button takes you to the
ting up SSH, see "SSH" on
IPMI: Enable/Disable IPMI (ADMIN password required).
Network Services panel is used to enable (ON) and disable (OFF) network
Ports panel not only displays STATUS information, but is used also to set up
INFO button: Displays the Ethernet port Status window for review pur-
poses.
GEAR button: Displays the Ethernet port settings window for editing pur-
poses.
"Web UI Timeout" on
SSH Setup window. For details on set-
page 50.
CHAPTER 2 • VelaSync User's Manual Rev. 3
"General Network Set-
page 184.
"Network Services" on