Spectracom VelaSync 1232 User Manual page 154

3.3 Managing References
About QZSS
QZSS is disabled by default. In order to receive QZSS signals, you must either be loc-
ated in the Japan region, or use a GNSS simulator (such as Spectracom GSG-5 or -6 Ser-
ies).
QZSS is not considered a standalone constellation and while VelaSync allows you to
enable QZSS by itself, it is recommended to use it in combination with GPS.
Determining Which GNSS Satellites Are Received
To see which GNSS satellites your VelaSync is currently receiving:
1. Navigate to
2. The
142
Note: Should you select more than 3 + QZSS con-
stellations, you will receive a Constellation Error once you
click Submit (ConstError).
INTERFACES > REFERENCES: GNSS
GNSS 0 status window will open:
0.
CHAPTER 3 • VelaSync User's Manual Rev. 3