Restoring The Default Ntp Configuration; Ntp Output Timescale - Spectracom VelaSync 1232 User Manual

2.10.5 Restoring the Default NTP Configuration
The VelaSync default NTP configuration can be restored at any time. It comprises basic
settings such as Stratum 1 operation with no other servers or peers, no broadcasting
and no access restrictions. External queries or modifications are not permitted, while
generally all IPv4 and IPv6 client connections are allowed.
To restore VelaSync to its default NTP configuration:
1. Navigate to
2. In the
3. In the dialog window that displays, click OK.
2.10.6 NTP Output Timescale
You can choose the timescale VelaSync will use for the time stamps it sends out to its
NTP clients and network nodes. This is done by setting VelaSync
CHAPTER 2 • VelaSync User's Manual Rev. 3
You can search any of the fields for specific information in the Search field
at the top of the window.
A limit of 10 entries will appear on the screen at any one time. If you have
more than 10 clients, you can move through the table using the First,
vious, Next and Last navigation buttons at the bottom of the screen.
MANAGEMENT > NETWORK: NTP
NTP Actions panel, click
Setup.
Restore Default NTP Configuration.
2.10 Configuring NTP
Pre-
System Time times-
73