Spectracom VelaSync 1232 User Manual page 90

2.10 Configuring NTP
1. Navigate to
2. The
nized NTP servers. Click the GEAR icon in the upper right-hand corner of the
Servers
3. The
added yet. In the event that added servers are not displayed in the NTP Setup
screen/NTP Servers panel, they could not be resolved. Verify the IP address.
Note that System servers cannot be edited or deleted.
78
MANAGEMENT > NETWORK: NTP
NTP Setup screen appears. The
panel.
NTP Servers window opens. Should the list be empty, no servers have been
To ADD a new server, click the PLUS icon in the upper right-hand corner,
and proceed to the next step.
Note: In order for other NTP Servers to be a valid ref-
erence, "NTP" must be enabled as both the Time and 1PPS
references in the Reference Priority table. See
figuring Input Reference Priorities" on
To EDIT an existing server, click the corresponding ACTION GEAR button,
and proceed to the next step.
To REMOVE a server (and its associated configurations), click the X-button
next to it, then confirm by clicking OK.
Setup.
NTP Servers panel displays a list of recog-
page 112.
CHAPTER 2 • VelaSync User's Manual Rev. 3
NTP
"Con-