The View Administrative Option - Avaya 4600 Series Administrator's Manual

4600 Series IP Telephone LAN Administrator's Guide
2. If you are using static addressing, do the following:
Use the View command to find the names of the files being used and verify that these
filenames match those on the TFTP server. Check on the Avaya website to verify whether
the correct files are being used.
Use the ADDR option to verify IP addresses.
Use the QOS option to verify QoS parameters.
Refer to Chapter 3 of the 4600 Series IP Telephone Installation Guide.
3. If the 4600 Series IP Telephone is not communicating with the system (DHCP, TFTP, or
DEFINITY), make a note of the last message that was displayed and consult the system
administrator.

The View Administrative Option

If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
Also use the ADDR option to view IP addresses (see "Static Addressing Installation" in
Chapter 3 of 4600 Series IP Telephone Installation Guide). These may have been
entered incorrectly. Verify whether you were provided with correct IP addresses.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
Press the Mute key momentarily. Do not press this key while pressing other keys.
The 4630 IP Telephone does not have a dedicated Hold button; for all other 4600
Series IP Telephones, pressing the Hold button instead of the Mute button will also
work.
The following text is displayed left-justified at the top of the display:
View settings
*=next
2. Press the * button at any time during viewing to display the next name and system value pair
from the list below, returning to the first pair after the last pair has been displayed.
Press the # button at any time during viewing to terminate the procedure and restore the user
interface to its previous state.
The View Administrative Option
5-6
#=exit
5