Phone administration and configuration
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select SSON.
5. In the SSON field, enter the new SSON.
The number must be between 128 to 254.
6. Press Save.
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure
if you are using DHCP addressing and the DHCP option number is changed from the
default number.
Using the VIEW administrative option
About this task
Use this procedure to view the parameters associated with the admin procedures.
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select View.
5. Press Back to return to the main menu.
VIEW field description
Setting
Model
Backup SW version
Gateway
September 2017
Description
The model of the phone that is set
by factory procedures.
The version of the software
backup.
The address of the gateway.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Associated Configuration
Parameter
MODEL
Table continues...
66