Table of Contents
Advertisement
Avaya 1692 IP Conference Phone
Appendix A: DHCP Scope Options
General Information
When specifying IP addresses for the file server or media server, use either dotted decimal
format ("xxx.xxx.xxx.xxx") or DNS names. If you use DNS, note that the system value DOMAIN is
appended to the DNSname you specify. If DOMAIN is null, the DNS names must be fully
qualified, in accordance with IETF RFCs 1034 and 1035.
•
Gateway (router) IP address(es)
•
Subnet mask
•
Avaya Communications Manager Gatekeeper IP address(es) H.323 only.
•
Avaya Communications Manager Gatekeeper port H.323 only. Although this can be a value
between 0 and 65535, the default value is 1719. Do not change the default value unless that
value conflicts with an existing port assignment.
•
Telephone IP address range.
Example
Suppose the range of IP addresses available for your IP telephone network are:
135.254.76.7 to 135.254.76.80
135.254.76.90 to 135.254.76.200
135.254.76.225 to 135.254.76.230
We recommend that you provision the 1692 Series IP Telephones with sequential IP
addresses.
We recommend not mixing 1692 Series IP Telephones and PCs in the same scope.
•
DNS server address(es) If applicable.
•
HTTP server address(es) If applicable.
•
HTTPS/TLS server address(es) If applicable.
The file server file path is the "root" directory the server uses for all transfers. This is the
default directory all files will be uploaded to or downloaded from. In configurations where the
upgrade script and application files are in the default directory,
Example 1692 DHCP Scope Configurations
1.
Select the correct Scope folder for the VLAN.
2.
Right click on Scope Options
The drop down box will contain Configure Option, as shown below.
3.
Click Configure Option.
Issue 1, September 2010
Installation, Configuration and Software Upgrade Guide
24
Advertisement
Table of Contents
