Device Configuration Using Dhcp Options - Avaya Vantage K175 Installing And Administering

Device configuration
• If ACTIVE_CSDK_BASED_PHONE_APP is set to the default value (""), Avaya Vantage
operates in the non Avaya Breeze
configuration parameters are not supported and some options are not available on the
Settings menu of Avaya Vantage
™
Vantage and telephony applications will not use the configured values. For more information
about whether a parameter is supported in the non Avaya Breeze
mode, see Appendix A, Supported configuration parameters.
The main non Avaya Breeze
™
Vantage Open. This application is currently supported with third-party SIP registrar and
communication platform, such as Broadsoft.
When in the non Avaya Breeze
configuration on PPM is not supported. If a parameter supports backing up on PPM and is
supported in the non Avaya Breeze
configured value unless the user reverts to the factory default settings of the device.

Device configuration using DHCP options

™
Avaya Vantage connects to the DHCP server during the boot up. Use the DHCP server to
provide the following information to the device:
• IP address
• Subnet mask
• IP address of the HTTP or HTTPS file server
• IP address of the DNS server
Configurable DHCP options
The following options can be configured on the DHCP server:
Option
Option 43
Option 55
September 2018
™
CSDK application based mode. In this case, some
™
. You can still configure unsupported parameters, but Avaya
™
CSDK application that Avaya Vantage
™
CSDK application based mode, backing up of the user
™
CSDK application based mode, then this parameter keeps the
Description
Specifies the encapsulated vendor-specific options that clients and servers use to
exchange information. To use this option, Avaya Vantage
value ccp.avaya.com. Option 43 is processed only if the first code in the option is 1
with a value of 6889. All values are interpreted as strings of ASCII characters that
are accepted with or without a null termination character. Any invalid value is ignored
and the corresponding parameter value is not set.
Specifies the parameter request list. Acceptable values are:
• 1 for subnet mask.
• 3 for router IP addresses.
• 6 for domain name server IP address or addresses.
• 7 for log server IP address or addresses.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
™
™
CSDK application based
™
supports is Avaya
™
sends option 60 with the
Table continues...
™
54