Air Shroud; Removing The Air Shroud - Dell EMC PowerEdge C6420 Installation And Service Manual

Figure 20. Installing the PERC battery
Next steps
1 If disconnected, connect the battery cable to the PERC card.
2 Follow the procedure listed in

Air shroud

Removing the air shroud

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 If applicable, disconnect the battery cable from the PERC card.
Steps
1 Press the clip on the air shroud to release the shroud from the sled.
2 Remove the shroud by rotating the shroud and releasing the hinge from the slot on the system.
After working inside your enclosure.
Safety instructions.
Before working inside your enclosure.
Installing and removing enclosure components 71