Air Shroud; Removing The Air Shroud - Dell EMC PowerEdge T340 DPJ1G Installation And Service Manual

Figure 23. Installing the system cover
Next steps
1 Place the system upright on its feet on a flat, stable surface.
2 Install the front bezel.
3 Reconnect the peripherals, and connect the system to the electrical outlet.
4 Power on the system and all attached peripherals.

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the system cover.
Step
Holding the blue touch points, lift the air shroud out of the system.
Safety instructions.
Before working inside your system.
Installing and removing system components 51