Air Shroud; Removing The Air Shroud - Dell EMC PowerEdge XE7420 Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
Steps
1. Hold the air shroud touch points at both ends and lift the air shroud out of the system.
2. Push the retention clip down and lift the mini PERC battery out of the air shroud.
Figure 14. Removing the air shroud
Next steps
Install the air shroud.
48 Installing and removing system components
Safety instructions.
Before working inside your system.