Programming From Scan Mode - Uniden BC350C Manual

Programming from SCAN mode

For example, when you find an interesting active police
frequency while scanning, and want to program it into your
private bank (see "SCANNING" on page xx) to scan the bank:
1. Press [HOLD].
HOLD appears on the display.
2. Press [PROG]. CH appears
and blinks to indicate that you
are in the Programming Mode.
To change the displayed fre-
quency, use [UP] or [DOWN]
while CH is blinking.
3. Press [PRIVATE]. PRIVATE
appears on the display.
If you want to program it into
another bank, press the
desired bank key. The bank
name appears on the display.
2 screens alternate to indicate
that Channel 1 is available to
be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use the [UP] or [DOWN] keys
to select a new channel and
even over write old channels.
4. Press [PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.
25