Priority Plus Scan Mode; Gps Mode; Tone Out Mode; Band Scope Mode - Uniden UBCD396XT Owner's Manual

works while scanning that system's control channel or (in the case of Motorola
systems) when the scanner is scanning any channel in the system.

Priority Plus Scan mode

The scanner stops the current operation and only performs Priority Scan checks as
described above.
To enter Priority Plus Scan mode:
1. Enter Hold mode.
2. FUNCTION + repeatedly tap NO until the scanner displays
Priority Mode Plus On.

GPS mode

(Requires a connected GPS receiver.) The scanner displays longitude, latitude, and
heading information.
To enter GPS mode, FUNCTION + tap GPS.

Tone Out mode

The scanner checks up to 10 user-programmed channels for two-tone sequential,
single, or group paging tones. When it detects a tone that matches the
configuration for that channel, the scanner displays the tone information and opens
squelch.
To enter Tone Out mode, tap MENU, then scroll down and select Tone- Out for...
To exit Tone Out mode, enter Scan mode.

Band Scope mode

The scanner searches a frequency ranges and displays a visual representation of the
signal level.
To enter Band Scope Mode:
1. Set one of the 3 search keys to a Band Scope search.
2. Enter Search mode.
3. FUNCTION + Tap the designated search key.
UBCD396XT
10