HP 8360 L Series User Manual page 344

Swept cw generator (including options 001, 004, and 008)
Table of Contents

Advertisement

Universal SCPI Error
Messages
override switch on the processor is set. Qualified service technicians,
refer to "ADJUSTMENTS," in the
Generator/HP 8360 L-Series Swept CW Generator Service Guide
more information.
Error Messages From -499 To -400
These error messages indicate that the Output Queue Control of
the swept CW generator has detected a problem with the message
exchange protocol. This type of error sets the Query Error Bit (bit
2) in the Event Status Register. One of the following has occurred:
An attempt has been made to read data from the Output Queue
n
when no output is present or is pending.
Data in the Output Queue has been lost.
n
Events that generate Query Errors do not generate Command Errors,
Execution Errors, or Device-specific Errors.
-440, Query UNTERMINATED after indefinite res
-430, Query DEADLOCKED
-430, Query DEADLOCKED;Output Buffer Full
-420, Query UNTERMINATED
-420, Query UNTERMINATED;Nothing To Say
-410, Query INTERRUPTED
Error Messages From -399 To -300
These error messages indicate that some device operations did not
properly complete, possibly due to an abnormal hardware or firmware
condition. This type of error sets the Device-specific Error (bit 3)
in the Event Status Register. Events that generate Device-specific
Errors do not generate Command Errors, Execution Errors, or Query
Errors.
-350, Too many errors and also -32768
-330, Self-test failed
-330, Self-test failed;Power-On Tests
-313, Calibration memory 1ost;Defaulted
Error Messages From -299 To -200
These error messages indicate that an error has been detected by
the swept CW generator's Execution Control Block. An error of
this type sets the Execution Error Bit (bit 4) in the Event Status
Register. One of the following events has occurred:
A data element following a header was evaluated by the swept CW
n
generator as outside of its legal input range or is inconsistent with
the swept CW generator's capability.
A valid program message can not be properly executed due to
n
some instrument condition.
HP 8360 B-Series Swept Signal
for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 83630lHp 83623lHp 83650lHp 83640l

Table of Contents