HP 8360 L Series User Manual page 221

List Menu
Function Group
M e n u M a p 2
Description
L-6 Operating and Programming Reference
FREQUENCY
This softkey allows access to the frequency list functions.
Auto Fill Incr
Auto Fill XPts
Auto Fill Start
Auto Fill Stop
Delete Menu
Enter List Freq
Enter List Power
Global Dwell
Global Offset
Pt Trig Menu
A frequency list consists of two or more frequency points. A
frequency point can be any frequency value within the specified
frequency range of the swept CW generator and must be entered
before a value for either ALC output power offset or dwell time is
accepted. The maximum number of frequency points in a frequency
list is 801.
Creating a Frequency List
There are two methods of constructing a frequency list:
1. Use the Enter List Freq softkey to begin entering frequency
points. The list will be generated in the order the values are
entered.
Automatically creates a frequency list using the
user-specified increment value.
Automatically creates a frequency list
containing a user-specified number of points.
Allows the entry of a start frequency for the
frequency list.
Allows the entry of a stop frequency for the
frequency list.
Reveals the frequency list delete menu.
point in the frequency list.
Allows the entry of a frequency point into the
frequency list.
Allows the entry of an ALC output power
correction value for a frequency in the frequency
list.
Automatically sets the dwell time for all points
in the frequency list to a user-specified value.
Automatically sets the ALC output power
correction value for all points in the frequency
list to a user-specified value.
Reveals the frequency list in the point trigger
menu.