HP 8360 L Series User Manual page 321

(STOP)
See Also
Function Group
M e n u M a p 7
Description
S-64 Operating and Programming Reference
(CENTER), a, FREQUENCY [MENU), (SPAN), (START)
"CW Operation and Start/Stop Frequency Sweep" in Chapter
"Programming Typical Measurements" in Chapter
SWEEP
This hardkey accesses the sweep menu softkeys.
Manual Sweep
Start Sweep Trigger Auto
Start Sweep Trigger
Start Sweep Trigger
Sweep Mode List
Sweep Mode Ramp
Sweep Mode Step
Activates manual sweep mode.
Depending on what parameter is
sweeping, frequency and/or power
can be changed manually with the
rotary knob or the arrow keys.
Automatically triggers a sweep
when (SINGLE) or (CONT) is pressed.
Waits for an HP-IB trigger to
Bus
trigger a sweep when (SINGLE) or
Waits for an external hardware
Ext
trigger to trigger a sweep when
Activates the list frequency sweep
mode.
Activates the analog frequency
sweep mode.
Activates the stepped frequency
sweep mode.
Sets the sweep time to a minimum
value for a given span.
Sets the time
and before a trigger pulse is sent
from the ANALYZER INTERFACE
BNC. A source settled SRQ is
generated.
1
1
delay after phase-lock