Deltamarker; Delta Mkr Ref; Disp Status - HP 8360 L Series User Manual

Delta Mkr Ref

Function Group
Menu Map
Description
Programming Codes
See Also

Disp Status

Function Group
M e n u M a p 8
Description
M A R K E R
3
This softkey displays the five markers available as the delta marker
reference. The delta marker frequency is calculated using the
equation:
where f, is the frequency of the active marker and fmref is the
frequency of the reference marker.
SCPI:
MARKer:REFerenc <marker number>
Analyzer:
MD1 function on, MD0 function off.
Delta Marker
"Marker Operation" in Chapter 1
"Programming Typical Measurements" in Chapter
SYSTEM
This softkey causes the status of various features to be displayed.
For example, this is what the swept CW generator displays as its
status after a factory preset:
AM=Off
UsrCorr=Off
Altn=Off SwpTrig=Auto AutoCal=None
This key is useful when checking the current operation state of
the swept CW generator.
mnemonics used to indicate status.
Lvl=Int RF Slp=Off
Pwr Swp=Off
SwpMode=Swept
The following is a listing of the various
Operating and Programming Reference D-5
Disp Status
1