Rotary Knob - HP 8360 L Series User Manual

Ref Osc Menu
Programming Codes
See Also
Function Group
Menu Map
Description
Programming Codes
See Also
Function Group
Menu Map
Description
Programming Codes
See Also
R-2 Operating and Programming Reference
10 MHz Freq Standard None
SCPI:
Analyzer:
NONE
POWER
NONE
This hardkey turns the RF power output on or off. Press (WON/OFF).
If the yellow LED above the hardkey is off, power is off, and RF OFF
appears in the message line of the display. Press the key again to
turn on RF power and restore the power value last entered.
SCPI:
POWer:STATe ONlOFFlllO
Analyzer:
RF1 power on, RF0 power off.
(MOD), [ )
POWER LEVEL
ENTRY
NONE
The rotary knob is active whenever the entry area is on. It controls
a rotary pulse generator that allows analog-type adjustment of the
active entry area. Although the rotary knob has the feel of analog
control, it is actually a digital control that generates 120 pulses per
revolution.
NONE
ARROW KEYS, ENTRY KEYS
"Entry Area" in Chapter 1
Sets the swept CW generator
to free-run operation, where no
frequency standard is used.