HP 8360 L Series User Manual page 270

*OPT?
l
This returns a string identifying any device options.
The instrument state is recalled from the specified memory register.
The value range is from 0 to 8.
The swept CW generator is set to a predefined condition as follows:
CALibration:PEAKing:AUTO OFF
CALibration:POWer:ATTenationO DBM
CALibration:POWer:RANGe 1
CALibration:SPAN:AUTO OFF
CORRection:FLATness? returns a0
CORRection:FLATness:POINts? returns a 0
CORRection:STATe OFF
DIAGnostics:ABUS:AVERage 1
DIAGnostics:TEST:ENABleALL
DIAGnostics:TEST:LOG:SOURceFAIL
DIAGnostics:TEST:LOOP OFF
FREQuency:CENTer value is (MAX+MIN)/2
FREQuency:CW value is (MAX+MIN)/2
FREQuency:CW:AUTO OFF
FREQuency:MANualvalueis (MAX+MIN)/2
FREQuency:MODE CW
FREQuency:MULTiplier 1
FREQuency:MULTiplier:STATe OFF
FREQuency:OFFSetO
FREQuency:OFFSet:STATe OFF
FREQuency:STARtMINimum
FREQuency:STEP calculated from span
FREQuency:STEP:AUTO ON
FREQuency:STOPMAXimum
LIST:FREQuency valueis (MAX+MIN)/2
LIST:FREQuency:POINts? returns al
LIST:MODEAUTO
LIST:TRIGger:SOURce IMMediate
Operating and Programming Reference S-13