Saving And Recalling An Instrument State - HP 8360 L Series User Manual

1-16 Getting Started Basic
The save/recall registers store and access a previously set instrument
state.
For example, set the swept CW generator to sweep from 3 to
11.2 GHz.
Press (START) (?J LGHz).
Press LSTOP) (iJ @ (GHz).
Press
( ) (-) (iJ (TJ IdBo).
P O W E R L E V E L
Press (MARKER).
Marker
Ml
Select
Select
Marker M2 (iJ 0 0 @ LGHz).
To save this instrument state in register 1, press (SAVE] (iJ. To verify
that the swept CW generator has saved this state:
Press [PRESET).
Press IRECALL] 0.
Press (MARKER).
The active entry area displays:
Notice the sweep end points, power level, and the asterisks next to
the marker 1 and 2 key labels.
You can save instrument states in registers 1 through 8. Register
0 saves the last instrument state before power is turned off. When
power is turned on, register 0 is automatically recalled.
15
1
and 2 set at 4.5 and