Function Group
M e n u M a p 3
Description
See Also
MENU SELECT
This hardkey allows access to the marker functions.
Delta Marker
Delta Mkr Ref
MI--M2 Sweep
Marker Ml
Marker M2
Marker M3
Marker M4
Marker M5
Markers All Off
The markers are functional whenever an asterisk appears next to the
key label, but only one marker can be active at a time. The active
marker is indicated in the active entry area.
"Marker Operation" in Chapter 1
"Programming Typical Measurements" in Chapter 1
Causes the swept CW generator to display
markers as an amplitude pulse.
Changes the swept CW generator's center
frequency to the value of the most recently
activated marker.
Displays the frequency difference between the
active marker and the marker designated by the
Delta Mkr
Ref .
Reveals the softkeys in the delta marker
reference menu.
Causes the swept CW generator to sweep from
Ml to M2.
Makes Ml frequency the active function.
Makes M2 frequency the active function.
Makes M3 frequency the active function.
Makes M4 frequency the active function.
Makes M5 frequency the active function.
Turns off all markers.
Changes the swept CW generator start and stop
frequencies to the values of Ml and M2.
Operating and Programming Reference M-3