Frequency - HP 8360 L Series User Manual

Function Group
M e n u M a p 2
Description
See Also
F-12 Operating and Programming Reference

FREQUENCY

This hardkey allows access to the frequency functions listed below.
Freq Mult
Freq Offset
List Menu
Step Swp Menu
Up/Down Size CW
Up/Down Size Swept
zoom
"Optimizing Swept CW Generator Performance" in Chapter
When this feature is on, the center
frequency and the CW frequency is
kept equal. Changing either the center
frequency or the CW frequency causes the
other to change to the same value. An
asterisk next to the key label indicates tha
this feature is active.
Sets the frequency multiplier value and
applies it to all frequency parameters.
Sets the frequency offset value and applies
it to all frequency parameters.
Displays the frequency list create/edit
soft keys.
Reveals the stepped frequency sweep edit
softkeys.
Sets the frequency step size in the CW
frequency mode.
Sets the frequency step size in the swept
frequency mode.
Places the swept CW generator in the
knob and numeric entry keys control CF,
and the up/down arrow keys control AF.
1