Entry Area - HP 8360 L Series User Manual

All function values are changed via the rotary knob and/or keys of
the entry area.
ENTRY
ON/OFF
ENTRY KEYS
The following are active only when the swept CW generator expects
an input.
This key lets you turn off or on the active entry
( / ):
ENTRY ON OFF
area. Turning off the entry area after a value is entered prevents
accidental changes.
ENTRY ON LED:
Arrow Keys:
The up/down arrow keys let you increase or decrease
a numeric value. The left/right arrow keys choose a significant
digit indicated by an underline.
Rotary Knob:
The rotary knob increases or decreases a numeric
value. The rotary knob can be used in combination with the
left/right arrow keys to change the increment size.
Terminator Keys:
After the numeric entry keys are used to enter a
value, these keys define the units.
Negative Sign/Backspace Key:
key backspaces over the last digit entered, otherwise a negative
sign is entered.
Numeric Entry Keys:
active entry area and must be followed by one of the terminator
keys before the function value changes.
ENTRY ON
LED
ARROW KEYS
BACKSPACE
Figure l-3. Entry Area
This LED lights when the entry area is active.
If a data entry is in progress, this
These keys enter specific numbers in the
ROTARY KNOB
Getting Started Basic l-5