Security Menu - HP 8360 L Series User Manual

Security Menu

Function Group
M e n u M a p 8
Description
See Also
S-50 Operating and Programming Reference
SYSTEM
This softkey accesses the security function softkeys.
Turns off the swept CW generator's data display,
Blank Display
active entry, and message line areas.
Writes alternating ones and zeros over all swept
Clear Memory
CW generator state functions and save/recall
registers a selectable number of times, then returns
the swept CW generator to the factory-preset state
of operation.
Disables the save function.
Save Lock
Displays zeros for all accessible frequency
Zero Freq
information.
The features listed above together with the softkeys
and Freq Mult provide the swept CW generator with security
controls for a variety of situations. The local lockout (LLO)
programming command adds security when the swept CW generator
is used in an ATE environment. A security calibration constant that
can be accessed through the service adjustment menu (requires a
password for access) is available also. Refer to the
Swept Signal Generator/HP 8360 L-Series Swept CW Generator
Service Guide
for information on calibration constants.
"Using the Security Features" in Chapter 1
Freq Offset
HP 8360 B-Series