ALC Bandwidth
Select Auto
Function Group
M e n u M a p 1
Description
Programming Codes
See Also
ALC Bandwidth
Select High
Function Group
M e n u M a p 1
Description
Programming Codes
See
A-10 Operating and Programming Reference
ALC
This softkey sets the swept CW generator to choose the ALC
bandwidth automatically depending on the current sweep and
modulation conditions. An asterisk next to the key label indicates
that this feature is active.
SCPI:
POWer:ALC:BANDwidth:AUTO ON]1
Analyzer:
NONE
ALC
BW
Menu
"Optimizing Swept CW Generator Performance" in Chapter 1
ALC
This softkey sets the swept CW generator to the ALC high
bandwidth position (100 kHz). In this mode, the ALC bandwidth
operates in a wide bandwidth for all sweep and modulation
conditions. An asterisk next to the key label indicates that this
feature is active.
SCPI:
Sending the swept CW generator an ALC bandwidth
frequency value of >10 kHz causes it to select the high ALC
bandwidth mode.
POWer:ALC:BANDwidth:AUTO OFF]0
POWer:ALC:BANDwidth <freq>[freq suffix] or
Analyzer:
NONE
Also
"Optimizing Swept CW Generator Performance" in Chapter 1