auto
Function Group
M e n u M a p 8
Description
Programming Codes
See Also
Extrnl
Function Group
M e n u M a p 8
Description
SYSTEM
This softkey sets the swept CW generator to choose its frequency
standard automatically. If an external standard
10 MHz REF INPUT BNC, then it is chosen as the reference. If no
external standard is connected, the internal standard is chosen as the
reference. If the internal standard has been disconnected also, the
swept CW generator operates in a free run state. An asterisk next to
the key label indicates that this feature is active.
SCPI:
ROSCillator[:SOURce]:AUTO ONlOFFlllO
Analyzer:
NONE
Ref Osc Menu
SYSTEM
This softkey tells the swept CW generator to accept an external
10 MHz signal as the frequency reference. The external signal must
be applied to the
10
the rear panel. If no external signal is applied,
appears on the message line of the display. An asterisk next to the
key label indicates that this feature is active.
MHz REF INPUT BNC connector located on
UNLOCK
Operating and Programming Reference T-l
is
connected to the
and
EXT REF