Appendix A: Default Switch And Jumper Settings - Xilinx ML605 Hardware User's Manual

Appendix A: Default Switch and Jumper Settings
Table A-35: Default Jumper Settings
GMII:
FMC JTAG Bypass:
System Monitor:
SFP Module:
PCIe Lane Size:
80
Send Feedback
Jumper REFDES
J69 System ACE CF Error LED Enable
pins 1-2: GMII/MII to Cu
J66
pins 2-3: SGMII to Cu, no clk
pins 1-2: GMII/MII to Cu
J67
pins 2-3: SGMII to Cu, no clk
J68 J66 pins 1-2, J68 ON: RGMII, modified MII in Cu
J18 exclude FMC LPC connector
J17 exclude FMC HPC connector
J19 Test_mon_vrefp sourced by U23, REF3012
J35 measure voltage across R-kelvin on VCCINT
J54 Full BW
J65 SFP Enable
J42 1 lane
www.xilinx.com
Function
ML605 Hardware User Guide
UG534 (v1.9) February 26, 2019
Default
Jump 1-2
Jump 1 - 2
Jump 1 - 2
no jumper
Jump 1 - 2
Jump 1 - 2
Jump 1 - 2
Jump 9 - 11,
Jump 10 - 12
Jump 1 - 2
Jump 1 - 2
Jump 1 - 2