Xilinx ML605 Hardware User's Manual page 71

Voltage and current monitoring and control are available for selected power rails through
Texas Instruments' Fusion Digital Power™ graphical user interface (GUI). Both onboard TI
power controllers are wired to the same PMBus. The PMBus connector, J3, is provided for
use with the TI USB Interface Adapter PMBus pod (for TI part number, see
GPIO). The ML605 board is shipped with a TI flyer containing information that allows the
user to purchase this EVM at a discount.
TI provides the
tools capable of communicating with the UCD92xx series of controllers from a Windows-
based host computer via the PMBus pod. The ML605 onboard connector J3 is wired for the
TI EVM interface and provides access to the PMBUS and UCD9240s for monitoring
purposes. This is the simplest and most convenient way to monitor the power rails. See
Table 1-31
For details concerning the use of the Fusion software tool, refer to the documentation
offered in the Fusion Digital Power Designer GUI help system (select Help →
Documentation and Help Center).
For more detailed information about this technology and the various power management
controllers and regulator modules offered by Texas Instruments, visit
www.ti.com/ww/en/analog/digital-power/index.html.
ML605 Hardware User Guide
UG534 (v1.9) February 26, 2019
Fusion Digital Power Designer software package
and Table 1-32.
www.xilinx.com
Detailed Description
EVM USB-TO-
which includes several
71
Send Feedback