Cleaning The Parts After Disassembly - WAGNER GM 5000EAC F Operating Manual

EDITION 07/2014
OPERATING MANUAL
8.4

CLEANING THE PARTS AFTER DISASSEMBLY

Please note:
All reusable parts (except for the parts conducting high-voltage such as cascade,
adapter, plug compl. etc.) should be cleaned thoroughly using a suitable cleaning
agent.
The adapter, plug compl. and the handle inside must be clean and dry after cleaning.
Care should be taken that these parts remain free of solvents, grease or sweat from
the hands (salt water).
Spare parts may have safety-relevant properties.
Use only WAGNER original spare parts and accessories.
Defective parts, O-rings and seal sets must always be re-placed.
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gasses.
In Chapter 13 the part numbers for gun spare parts can be found as well as for wearing
parts such as seals.
ORDER NUMBER DOC 2344500
ATTENTION
WARNING
Examine the compatibility of the cleaning agents and working
media on the basis of the safety data sheets.
53