Filter; Reduction Fittings For High-Pressure Hoses - WAGNER GM 5000EAC F Operating Manual

EDITION 07/2014
OPERATING MANUAL
12.3

FILTER

Order No. Designation
3204604 Edge fi lter 60 mesh (white)
3204605 Edge fi lter 100 mesh (black)
9999002 Edge fi lter 200 mesh (yellow)
12.4

REDUCTION FITTINGS FOR HIGH-PRESSURE HOSES

The classifi cation of WAGNER fi ttings is consistent with the following classifi cation, each
separated by high-pressure and low pressure fi ttings:
Double fi tting - male / male thread
Reduction fi tting - female / male thread
Adjustable screw - female / male thread: allows precise angle adjustment (swivel)
90° elbow - adjustable or male / male thread (elbow fi tting)
Bulkhead fastener - male / male thread with pressure-resistant feed-through
Stopper - male thread for closing (plug fi tting)
Hose fi tting with union nut and sealing cone (hose fi tting)
The short description of the fi ttings are as follows:
2nd thread, e.g. G1/4", 1/4"NPS, M16x1.5
M: male (outer thread) F: female (interior thread)
Short description see table above, e.g. RF = Reduction Fitting
Order No. Designation
384555 Reduction fi tting-RF-FM-M16x1,5-1/4"NPS-PN530-SSt
384559 Reduction fi tting RF-FM-M16x1,5-G1/4"-PN530-SSt
384556 Reduction fi tting RF-FM-M16x1,5-3/8"NPSM-PN530-SSt
34041 Reduction fi tting RF-FM-1/4"NPS-M16x1,5--PN270-SSt
179732 Reduction fi tting RF-FM-1/4"NPS-3/8"NPS--PN270-SSt
179247 Reduction fi tting RF-FM-1/4"NPS-G1/4"--PN270-SSt
In the large Wagner Accessories Catalogue for wet coating you will also fi nd other material
fi ttings.
ORDER NUMBER DOC 2344500
Materials, SSt = Stainless steel
Nominal pressure (in bar)
1st thread, e.g. G1/4", 1/4"NPS
B_00019
M
B_03221
F
69