Safety Information On Discharges - WAGNER GM 5000EAC F Operating Manual

Electrostatic aircoat spray gun for manual operation and for flat or round jet nozzles

Hide thumbs Also See for GM 5000EAC F:

Table of Contents

EDITION 07/2014

OPERATING MANUAL

4.4

SAFETY INFORMATION ON DISCHARGES

The plastic parts of the spray gun are charged electrostatically by the high-voltage fi eld of

the spray gun. In case of contact with plastic parts harmless discharges (brush discharges)

may occur. They are completely non-hazardous for human health.

When keeping a distance of 4 to 10 mm; 0.15 to 0.4 inch between spray gun and object

to be sprayed, the corona discharge at the end of the electrode is visible during darkness.

4.5

USE IN AN EXPLOSION HAZARD AREA

In explosion hazard areas only use approved explosion-proof electrical devices.

4.6

NOTES TO GERMAN REGULATIONS AND GUIDELINES

Electrical devices and equipment

Part 2, Chapter 2.36 Working with Liquid Ejection Devices

Part 2, Chapter 2.29 Working with Coating Products

Explosion protection rules

Avoiding ignition risks

Equipment for cleaning work pieces with solvents

Guidelines for liquid ejection devices

Painting rooms and equipment

Electrostatic coating

Plant Safety Ordinance

Note: All titles can be ordered from Heymanns Publishing House in Cologne, or they

can be found on the Internet.

ORDER NUMBER DOC 2344500

Table of Contents